FILES T E C
Inject the 20cc of suspension fluid into the bottom of the fork leg,
and then repeat the same process on the other side. Both bottom
legs should have 20cc of oil in them.
Now, fully slide the lowers onto the fork. The threaded ends of the
rods should come out on both sides. If they don’t, you can use a
pick to guide them into place like so.
Install the new foot nut and plastic
crush washers on both sides.
Then torque the foot nuts
down to 50 inch-pounds ( 5. 7
Spray the whole fork down with isopropyl alcohol and clean with
a paper towel
Use the 2-millimeter Allen wrench to reinstall the red rebound
knob to the bottom of the fork leg. Be sure that the set screw
aligns with the slot on the rebound rod when tightening it.
some of the
to the fork to
and then go
hit the trails. ❏