FILES T E C H
7 Leave the stem on the bike after removing the handlebar.
No sense in having extra parts
floating around the garage.
Take the handlebar and insert it into the Park Tool SGI- 7 to be
cut at the proper angle. Push the bar all the way in and make sure
that it bottoms out properly.
Begin cutting into the
handlebar. Start slowly
and cut a small groove
into the bar.
After inserting the handlebar into the jig, take the whole assembly
and secure it properly into a vise so that there is no play when
cutting. Make sure that the line drawn in step 5 lines up with the
line cut built into the guide.